Minnesota Outdoorsman
General Category => Taxidermy => Topic started by: ice_bandit on December 12/02/07, 09:36:13 PM
-
I was out deer hunting this evening and came across a coyote that was laying in some brush. Just wondering if anyone on here traps them or skins them and brings the fur in? Only one hole from my .54 cal muzzleloader.
-
How was it skinned and what do you want for it?
-
didn't skin it i don't know how i've never done it before. I want nothing for it, just trying to clear the coyotes from where i deer hunt and this one gave me the perfect opportunity. Probally will have more to give away through out the muzzleloader season.
-
Where are you located if not too far I can come skin it and show you how. Is it froze? Did you gut it?
-
i live out in glencoe, mn. didn't gut it wouldn't even know where to begin
-
I was just asking because you skin them differently for taxidermy, you don't have to but if you make a small dorsal incision it is a better quality mount. How far from Lakeville are you?
-
LLtaxidermy. I'm curious how long it takes you to skin a coyote. I'm guessing you've done lots of them. I skinned a fox once and was amazed at how long it took. I remember the feet being especially complicated to skin.
Thanks.
-
I haven't done a lot but I suppose I could get one done in about two hours if it's fresh. If it's been forzen and the foot pads are hard it takes a little longer but it's not bad. I usually won't totally skin them until i'm getting ready to mount them. I leave the feet head and tail in so I can get it frozen right away unless i'm not busy then i'll just do it. If I leave the feet and skull I can get it skinned in about half hour. Keep in mind the whole thing is skinned through about a 10-12 inch hole on it's back. I've been getting a lot of interest about this subject so I think i'm going to post kind of a photo how to on here so everyone knows how to skin for lifesize.
Thanks
Lee
-
I actually work down by shakopee if you wanted to meet up and grab it.
-
I should be in Lakeville this weekend if you want to meet somewhere. I'm in Rochester all week otherwise.
-
Coyote...Yum...Taste like chicken. ;D
-
LL,
Why screw around through such a small incision. You would have to cut your form and mess around reinforcing it and putting it back together through that 10-12 inch hole. Open it up and sew it. The little extra time you spend sewing will make up for the time you waste skinning and trying to put that form back together that you cut in chunks to fit through that incision. On something as thick as a coyote the poorest stitch job in the world would have a hard time showing. If you spend just a little time on your stitch you will never even know it is there.
-
I agree totally but chances are the pose I was goin to do i'd only have to cut it in half wich i'd probably have to do anyhow. And I hate sewing!!! ;D
-
Thats what I figured. :violin: ;D. After you do a few more you might change your mind.
-
Didn't really frown upon sewing until I mounted a Bison. Now I cringe at the word!!!! :cry: