Recent

Check Out Our Forum Tab!

Click On The "Forum" Tab Under The Logo For More Content!
If you are using your phone, click on the menu, then select forum. Make sure you refresh the page!

The views of the poster, may not be the views of the website of "Minnesota Outdoorsman" therefore we are not liable for what our members post, they are solely responsible for what they post. They agreed to a user agreement when signing up to MNO.

Author Topic: Lee's night/crawler/picker  (Read 1807 times)

0 Members and 1 Guest are viewing this topic.

Offline Lee Borgersen

  • AKA "Smallmouthguide"
  • Pro-Staff
  • Master Outdoorsman
  • *
  • Posts: 15328
  • Karma: +40/-562
  • 2008-2011-2018-2019 2020 Fish Challenge Champ!
    • Lee's Lake Geneva Guide Service
                              Tip OF The Week :popcorn:

               Lee's night crawler flicker picker upper.
 
 
Many years ago I developed a bad back. So, in the Spring when crawlers are plentiful after a storm I'd swing into action. After a short period of time picking up crawlers the old back pain would kick in. I needed a way to pick up those babies without bending over. People that know me will tell you that I'm not to skilled at making something new. However give me some junk and I'll make something out of it.
 
 
What I'm about to reveal to you will revolutionize your method of collecting crawlers on pavements. You will not only save your back stress, but increase your rate of collection speed by 3 to 1. But wait! I'm not done yet. The best is yet to come. You will never have to physically touch any of crawlers that you collect.
 
 
By now I know what your thinking. "Is this guy full of it or what?".  :scratch:
 
Ok! So, what do I need to build one of these contraptions so I can get started?
 
1 gallon size plastic milk jug.
 
3 or 4 plastic tie wraps.
 
2 pcs. of 1/4 round trim. (approx. 4' long depending on how tall you are)
 
1 razor knife.
 
1- 5 or 2.5 gal wide mouth bucket.

As most of us already know the best time to collect crawlers is Spring time. Right after an electrical storm with lots of rain. I head for the local forest preserve before the pavements dry off. The crawlers head for the pavements because the ground is over saturated. They are easy to find and not stuck half way into the grass. Last week I gathered 250 crawlers one morning and 250 the next morning. I could have collected more each day if I was greedy.

I hold my home made crawler holder jug in one hand with it being attached to a 4 ft. piece of 1/4 round. When it's time to flick a crawler into the jug I use another 4 ft. piece of 1/4 round with a very small piece of plastic attached to the end (need a slight curve in plastic). This I hold in my other hand.

Capturing the crawler is as easy as sliding the curled plastic under the crawler and flicking it into the jug. Sounds complicated but it's so slick you won't believe it. When I get about 60 crawlers in the jug I'll tip it over into a large bucket and repeat the process.

So in summery I hold the jug stick in my left hand with the jug touching the pavement. I have the flicker stick in my right hand and flick the crawler into the jug with part of the jug cut out so the worms fly in.
I've taken a photo of the set up for you to view. You would almost have to see it in action to believe how simple yet productive this system is.

If you have any questions please ask me on this thread.


Lee  
« Last Edit: May 05/15/12, 08:51:57 PM by Lee Borgersen »
Proud Member of the CWCS.
http://www.cwcs.org

Member of Walleyes For Tomorrow.
www.walleyesfortomorrow.org

              Many BWCA Reports
http://leeslakegenevaguideservice.com/boundry_%2712.htm

If you help someone when they're in trouble, they will remember you when they're in trouble again