Recent

Check Out Our Forum Tab!

Click On The "Forum" Tab Under The Logo For More Content!
If you are using your phone, click on the menu, then select forum. Make sure you refresh the page!

The views of the poster, may not be the views of the website of "Minnesota Outdoorsman" therefore we are not liable for what our members post, they are solely responsible for what they post. They agreed to a user agreement when signing up to MNO.

Author Topic: Strikemaster issues  (Read 1466 times)

0 Members and 1 Guest are viewing this topic.

Offline outdoorsman388

  • Outdoorsman
  • Posts: 70
  • Karma: +0/-0
I'm working on a friends strikemaster lazermag. It wouldn't draw in gas so I changed the fuel line, checked to make sure fuel was running through the filter fine and removed and soaked the diaphragm. It still won't run unless on half choke. I was wondering if I should just replace the diaphragm. It's the model when they first put the on/off switch on the throttle. Does anyone have any other ideas? Thanx Scott.
NOTICE: Due to the rising cost of ammunition, I will no longer be firing warning shots!

Offline dew2

  • Master Outdoorsman
  • Posts: 2007
  • Karma: +18/-27
I'm working on a friends strikemaster lazermag. It wouldn't draw in gas so I changed the fuel line, checked to make sure fuel was running through the filter fine and removed and soaked the diaphragm. It still won't run unless on half choke. I was wondering if I should just replace the diaphragm. It's the model when they first put the on/off switch on the throttle. Does anyone have any other ideas? Thanx Scott.
Have you tried my suggestion from the other site??The screen.
Keeping America clean and beautiful is a one mans job,Mine