Recent

Check Out Our Forum Tab!

Click On The "Forum" Tab Under The Logo For More Content!
If you are using your phone, click on the menu, then select forum. Make sure you refresh the page!

The views of the poster, may not be the views of the website of "Minnesota Outdoorsman" therefore we are not liable for what our members post, they are solely responsible for what they post. They agreed to a user agreement when signing up to MNO.

Author Topic: First oil change on mower  (Read 3863 times)

0 Members and 1 Guest are viewing this topic.

Offline Moon Lake Refuge

  • Xtreme Outdoorsman
  • Posts: 101
  • Karma: +5/-0
Recommended at 5 hours to change out the break in oil and get all the shavings out.  I've done this on other equipment I've owned but this is the first one I've had with an oil filter.  Should I be putting on a new filter too? or just swap out oil.
Thanks,

Offline Moon Lake Refuge

  • Xtreme Outdoorsman
  • Posts: 101
  • Karma: +5/-0
For reference this is a 19hp briggs on a rider.

Offline Rebel SS

  • Master Outdoorsman
  • Posts: 26405
  • Karma: +185/-50
  • "Seems like time is here and gone".....Doobie's
Yes, yes, yes!!! Always change filters with oil! And...rub oil on rubber filter base gasket, and HAND tighten only!!!!

Offline Moon Lake Refuge

  • Xtreme Outdoorsman
  • Posts: 101
  • Karma: +5/-0
Recommended at 5 hours to change out the break in oil and get all the shavings out.  I've done this on other equipment I've owned but this is the first one I've had with an oil filter.  Should I be putting on a new filter too? or just swap out oil.
Thanks,
Yeah my buddy through one on his bike with a wrench.  I had to pierce it all the way through with a long screwdriver to get the leverage to undo it.

Offline Rebel SS

  • Master Outdoorsman
  • Posts: 26405
  • Karma: +185/-50
  • "Seems like time is here and gone".....Doobie's
Good way to rupture the seal, too...and then a mile down the road....*FOOOSH*     :doah:

Offline Moon Lake Refuge

  • Xtreme Outdoorsman
  • Posts: 101
  • Karma: +5/-0
First oil change... Factory filter felt like it was torqued on with an impact wrench, drained the oil and yuck... Looked like someone dumped silver glitter in it.  May do another oil change in 5-10 hours just to get all the factory junk out.

Offline The General

  • MNO Staff
  • Master Outdoorsman
  • *
  • Posts: 6782
  • Karma: +20/-27
  • Smackdown King
First oil change... Factory filter felt like it was torqued on with an impact wrench, drained the oil and yuck... Looked like someone dumped silver glitter in it.  May do another oil change in 5-10 hours just to get all the factory junk out.

Good idea.  Oil is cheap motors are not :happy1:
Eastwood v. Wayne Challenge Winner 2011

The Boogie Man may check his closet for John Wayne but John Wayne checks under his bed for Clint Eastwood

Offline Rebel SS

  • Master Outdoorsman
  • Posts: 26405
  • Karma: +185/-50
  • "Seems like time is here and gone".....Doobie's
That's why you always dump oil and filter after the first few hours of solid running on a small engine.Also why on my new truck I dumped it at 1,000 miles. Should see when they do a fluorescence scan on oil...looks like silver sparklies all thru the oil. I've been wrenching and building engines since the mid 70's, and never blown one yet. Even on my race bikes.

Offline Moon Lake Refuge

  • Xtreme Outdoorsman
  • Posts: 101
  • Karma: +5/-0
First oil change... Factory filter felt like it was torqued on with an impact wrench, drained the oil and yuck... Looked like someone dumped silver glitter in it.  May do another oil change in 5-10 hours just to get all the factory junk out.

Good idea.  Oil is cheap motors are not :happy1:
Yeah with what came out of the first change I am in no way confident that everything came out at all.