any tips...

[JohnWester]

to get a stuck choke tube out?  i am soaking a little pb blaster in there right now

[HD]

Jr had one he had a hell of a time getting out. He had to buy a special tool on line. He's at work right now, so I can't ask him. I will when I see him later today.

[Rebel SS]

After soaking a while, I'd take a hairdyer to the barrel end and get 'er hot, and see if ya can use yer choke wrench to break it free. After that, I'd clean the threads out good with a barrel brush and coat the threads with choke tube never seize, I think it's called.

[dew2]

Got a bench top vice? Usually below the vice jaws there are pipe jaws semi cicular grips to grasp pipe.Remove the barrel fron breach, line the pipe jaws with a piece of leather from a belt not to stiff leather just enough to protect steel an blueing,Then use pipe wrench long handled whih same leather insert to protect the steel an blueing of the choke. Use a hair dryer to heat the barrel (Expansion) Then use a mallet and smack the pipe wrench handle counter clock wise.It may work without heat? be gentel not to mar the steel an blueing.
 Use the rough side of leather towards the barrel n choke more friction less slipping

[HD]

Jr bought an internal pipe remover to get his out.