Recent

Check Out Our Forum Tab!

Click On The "Forum" Tab Under The Logo For More Content!
If you are using your phone, click on the menu, then select forum. Make sure you refresh the page!

The views of the poster, may not be the views of the website of "Minnesota Outdoorsman" therefore we are not liable for what our members post, they are solely responsible for what they post. They agreed to a user agreement when signing up to MNO.

« previous next »
Pages: [1]   Go Down

Author Topic: Barretta AL 391 Plug Removal  (Read 1929 times)

0 Members and 2 Guests are viewing this topic.

October 10/08/07, 04:24:06 PM

Offline brownma

  • Posts: 4
  • Karma: +0/-0
Barretta AL 391 Plug Removal
My Barretta AL 391 has its plug installed as it comes from the manufacturer.
The User Manual states that it should be removed only by a gunsmith.
Is this true, or can I safely remove it?  If so, how would I go about it?
Logged
November 11/05/07, 01:30:35 PM Reply #1

Offline Uplander

  • Outdoorsman
  • Posts: 15
  • Karma: +0/-0
Re: Barretta AL 391 Plug Removal
You don't need a gunsmith. I removed the plug from my AL 390 (gives you 4 shots total rather than 3) myself. This was about 10 years ago, so I don't recall exactly how I did it. I thought it was explained in the owner's manual.




Logged
"Do what you can, with what you have, where you are" - Theodore Roosevelt
Pages: [1]   Go Up
« previous next »
 

Page created in 0.133 seconds with 33 queries.